Studio Recording

SISTEMA

• Risposta in frequenza: 35Hz - 20kHz ±2dB
• Frequenza di taglio del crossover: 2300Hz
• 3rd Harmonic Distortion@ 90dB SPL, 1m, 500-7kHz: 0.08%
• 3rd Harmonic Distortion @ 90dB SPL, 1m, 200-20kHz: 0.2%
• 3rd Harmonic Distortion @ 90dB SPL, 1m, <200Hz: 1.5%
• Acoustic Output - SPL @ 1m, Long term (80Hz - 20kHz): 105dB
• Acoustic Output - SPL @ 1m, Peak (80Hz - 20kHz): 108dB
• Ingresso audio: XLR, RCA (balanced/unbalanced) 
  WOOFER
• Diametro: 180mm (7.1")
• Configurazione Voice Coil: High temperature single coil
• Diametro Voice Coil: 38mm (1.5")
• Former Material: High-strength Polyamide - Glass Fiber
• Magnete: Ferrite
• Cono: Mineral Filled Polypropylene
• Magnetic Shielding: Bucking magnet and steel cap 
  TWEETER
• Diametro della capsula: 25.4mm (1")
• Diametro Voice Coil: 25mm (0.98")
• Magnete: Ferrite
• Cono: Silk
• Gap Design: Ferrofluid Cooled
• Magnetic Shielding: Bucking Magnet 
  AMPLIFICATORE
• Risposta in frequenza: 20Hz - 20kHz(±0.2dB)
• Operating Band Pass: 20Hz - 2400Hz (LF)/2400Hz - 20kHz (HF)
• Total Harmoic Distortion: 0.01% 120 Watts into 4 Ohm Load
• Long Term Power @ 4 Ohms: 80 Watts
• Burst Power @ 4 Ohms: 120 Watts
• Output Topology: Class AB
• LF Trim: Constantly variable ±3dB
• HF Trim: Constantly variable ±3dB
• Subsonic Filter: -3dB @ 30Hz
• Driver Protection: Current Limiting
• Temperature Protection: Thermal Cut-Off Switch
• Indicators: Event badge 'On' mode
• Cooling: Convection - Aluminium Heat Sink
• Power Requirements: Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA. Power via detachable 3 circuit IEC type linecord 
  COSTRUZIONE
• Materiale: MDF
• Low Frequency Vents: Front Port
• Dimensioni Cabinet: 260 x H375 x 300 mm
• Peso Cabinet: 17kg (37.48lb) 
  ATTENZIONE: il prezzo è inteso per la cassa SINGOLA